GoPro-Housing available + Polyamid-Screw-Set for the Q-nano

Hi there,

the GoPro-Housing is now available (again) in the shop. It fits the Quadrixette 30 just perfectly, but it can be used with other frames as well of course.

"Snap-In"-Mechanism for a complete protection and a stable mounting:
We are especially proud of this, thats why the housing has been named after it: Due to a front-plate with a "snap"-mechanism, the box is completely sealed. There is no open side, which means the GoPro is completely safe inside and can't fall out. Also you do not need any rubber or zip-tie to close it.
Due to this the housing is extremely resistant, i actually could stand on it (80kg) without a problem.
 

Optional lens protection:
The housing comes with everything you need to install one of the widely available replacement lenses (for the skeleton-housing). It does not need to be glued in, but instead is being hold perfectly tight by 3 nylon screws. This way the lens can be used in different front-plates and/or housings.
 

Variable mounting options:
By using the 3 countersunk screws and the buttefly nuts included in the Quadrixette 30-frames, the housing can be mounted very flexible
 

Perfectly made for the Quadrixette 30-frame:
"Snap" can be easily installed/uninstalled on the Quadrixette 30. This way you can quickly change between different cameras if needed.
The special thing: The GoPro can be mounted, so that the lens indeed is really in the middle of the frame, not "a bit" tending to one side (which looks stupid on video).
 

Modular approach:
The front-plate with the "snap"-mechanism allows the usage of different front-plates for different use-cases. The front-plate included in the standard housing is made for installing just the GoPro and nothing else. By using the "duo"-adapter, also available in the shop, you can mount a CCD-cam in addition to the GoPro without an issue.

Also i've added a Polyamid screw-set for the nano, as some prefer the lighter build (but loose a little bit of stability).

KK-Board-45°-adapter available!

Hi there,

as requested i just added a new product to the shop: an adapter-board which allows mounting all boards that require a "45°-twisted" mount (KK-Board, Hobbyking-Board).

It is supposed to be used with the Quadrixette, but will work with most other frames as well.

Cheers,
Nic

Price increase OpenPilot adapter board

Hi there,

i just had to increase the price for the OpenPilot adapter board from 2,90€ to 4,90€. It needs 8 screws, 2 nuts and 2 spacers for best mounting. This is quite a bit more than i calculated at the beginning and with the old price it's just not doable any more...

KK-Adapterboard will be in this week (90 degree offset), probably at the same price.

Cheers,
Nic

First sets of the OpenPilot adapter-plate are available

As of now, the adapter-plate for the OpenPilot Copter Control-Board is available in the shop. Only in white for now, black will follow in about 2 weeks. See "accessories".

Update: M3 drill bit now available in the shop!

As previously announced, the M3 drill bit is now available in the shop (under "accessories").

Soon in shop: M3 drill bit

Hi there,

as i read it is not easy to get M3 drill bits outside Germany/Europe. Therefore i'll buy a batch of there here and put them in the shop as well for a low price (probably around 1€, 1,7$).

Available in the shop starting this Friday.

Cheers,
Nic

Quadrixette 30 and Nano back in stock

Another batch has arrived in the shop (for every kind, every color). The numbers are limited again, as my supplier of black POM-screws could not deliver as planned yet. It will take another 2-3 weeks for that. Until then i've ordered some from another supplier for a MUCH higher price, hence i only ordered a small number.

Due to the fact that i'm providing 2 different frames in 2 different colors, which are all needing the same parts partially, the amount of available frames per kind depends on the amount of orders for another frame. Therefore don't worry if stock is low for one frame-kind, in most cases i'll update the stock based on the actual inventory state (of the parts).

I had to order a very high number of black POM screws in order to be able to order it directly from the manufacturer, therefore i'll add them in small packs seperately to the shop.

OCC-Adapter for Quadrixette 30 available soon

As it has been requested i will add a new product to the shop soon: An adapter to easily mount the Open Copter Control the Quadrixette 30-Frame.

The adapter plates are ready, i'm just waiting for the parts that are needed to apply it to the frame. The white plates will be available in about 1 week, the black ones will take a bit longer (as i'm getting a new shipment of black nylon screws directly from the factory).

This is what they'll look like:

I'll report here if they made it into the shop.

Cheers,

Nic

Blog for the shop launched!

Hi guys,

i was desperate for a way to keep in contact with the owners of my frames (existing and potential), and i think a shop is a good way to do so.

In the future you will find the following here:

- tipps on the usage of the current frames
- infos on new frame concepts
- infos about improvements of the current frames
- shop status and informations when new items have arrived

You can add the RSS feed for being informed automatically if a new post has been made.

Cheers,
Nic